Post by xiaoxiao11 on Jan 6, 2012 21:20:37 GMT -5
Even the most expensive floors can have problems. Woods are prone to scratches than any other flooring. Problems can range to minor problems to the surface or to a major one which damage on the structure. You can seek for a professional who will repair the damage or try to do it yourself.
I would try to tackle normal floor problems and possible ways to repair those.
1. One problem is the hardwood surface scratches which are very hard to avoid since this is natural wear and tear on every wood. If scratches on the floor are unapparent, color sticks or urethane touch-up kits available at most floor retailer stores can be used. If scratches are deep, you will need to change the damaged boards. I
2. Another problem would be buckled hardwood which is when boards rise up from the sub floor due to humidity levels. This should be repaired at once to avoid larger damage and the hazard of tripping. Expert help is sometimes required since the problem is beneath the floor. Fixing a screw into the flooring and the sub floor pulls down the buckled portion of the floor; cement block can also be used to deal with the problem
3. Hardwood plank gaps or separations of gaps are caused naturally by climate or by dryness. Woods will shrink or expand when wet or dry. The problem is seasonal so if the weather is humid, the floor is fine. Just be patient in waiting for the floor to return on its normal shape again, as long as the moncler coat gaps are not that large, it is definitely okay.
4. Loose planks of wood can be fixed through nail and hammer set. Greatly loose boards can have deeper problems; this can be solved through replacement of the damaged strips on the floor.
5. Broken or split woods on the floor can also be repaired through hammer and special angled nails; larger splits may also need replacements.
6. Stained hardwood floors can be the most devastating problem on the floor since stains can mess up the beauty of the whole floor having dark colors. Refinishing the whole floor can be the only way to deal with stains but you can try this few steps:
a. Sand out the stained wood
b. Apply an acid mixture; this is a mixture MONCLER ARUM of acid crystals (sold at retail flooring stores) and water on a clean white cloth. Let the mixture set on the floor for an hour.
c. Check if the stain is gone; if not repeat the process over again.
d. Once the stain is washed out rinse the area with vinegar and let the area dry completely.
e. Apply an oil-based stain that can match the bleached portion. Additional coats would be necessary to level the color of the floor. Once you have arrived at the color that you want, let the floor dry overnight.
Be sure to wear protection for your eyes when doing the whole process of floor stain removal.
7. Washboarding or cupping hardwood is moncler jacket a hardwood floor problem characterized by wood strips that are high on the edges but lower on the center. Cupping can be caused by moisture imbalance wherein more water is stagnated on the bottom of the wood than on top. The remedy for this problem is to stabilize the humidity levels of the wood surface first. Sand it out and refinish the hardwood.
8. Warped floors are floors that lose its shape. This can pose a serious problem; thus professional help is needed at once.
Cleanliness at home is still the best way to maintain the sturdiness of the hardwood floor. Vacuuming and mopping of the floor at least once a week is a good start. It has also been advice not to wax floors with polyurethane coatings because it will be very hard to recoat or refinish it again without sanding it wholly first.
Do not feel obliged to call the help of experts to make minor repairs on your flooring problems. There are those which are easy to deal with and you can try to solve it on your own. This can save you from a lot of hassle and money which can be used for bigger problems in the long run.
Hardwood floor moncler christophe repair takes a lot of time and patience. With appropriate techniques, tools and products, fixing of the floor will be as easy as 1-2-3.
Lee Dobbins writes for www.refinishing-hardwood-floors.com where you can learn more about choosing, maintaining and refinishing hardwood floors.
I would try to tackle normal floor problems and possible ways to repair those.
1. One problem is the hardwood surface scratches which are very hard to avoid since this is natural wear and tear on every wood. If scratches on the floor are unapparent, color sticks or urethane touch-up kits available at most floor retailer stores can be used. If scratches are deep, you will need to change the damaged boards. I
2. Another problem would be buckled hardwood which is when boards rise up from the sub floor due to humidity levels. This should be repaired at once to avoid larger damage and the hazard of tripping. Expert help is sometimes required since the problem is beneath the floor. Fixing a screw into the flooring and the sub floor pulls down the buckled portion of the floor; cement block can also be used to deal with the problem
3. Hardwood plank gaps or separations of gaps are caused naturally by climate or by dryness. Woods will shrink or expand when wet or dry. The problem is seasonal so if the weather is humid, the floor is fine. Just be patient in waiting for the floor to return on its normal shape again, as long as the moncler coat gaps are not that large, it is definitely okay.
4. Loose planks of wood can be fixed through nail and hammer set. Greatly loose boards can have deeper problems; this can be solved through replacement of the damaged strips on the floor.
5. Broken or split woods on the floor can also be repaired through hammer and special angled nails; larger splits may also need replacements.
6. Stained hardwood floors can be the most devastating problem on the floor since stains can mess up the beauty of the whole floor having dark colors. Refinishing the whole floor can be the only way to deal with stains but you can try this few steps:
a. Sand out the stained wood
b. Apply an acid mixture; this is a mixture MONCLER ARUM of acid crystals (sold at retail flooring stores) and water on a clean white cloth. Let the mixture set on the floor for an hour.
c. Check if the stain is gone; if not repeat the process over again.
d. Once the stain is washed out rinse the area with vinegar and let the area dry completely.
e. Apply an oil-based stain that can match the bleached portion. Additional coats would be necessary to level the color of the floor. Once you have arrived at the color that you want, let the floor dry overnight.
Be sure to wear protection for your eyes when doing the whole process of floor stain removal.
7. Washboarding or cupping hardwood is moncler jacket a hardwood floor problem characterized by wood strips that are high on the edges but lower on the center. Cupping can be caused by moisture imbalance wherein more water is stagnated on the bottom of the wood than on top. The remedy for this problem is to stabilize the humidity levels of the wood surface first. Sand it out and refinish the hardwood.
8. Warped floors are floors that lose its shape. This can pose a serious problem; thus professional help is needed at once.
Cleanliness at home is still the best way to maintain the sturdiness of the hardwood floor. Vacuuming and mopping of the floor at least once a week is a good start. It has also been advice not to wax floors with polyurethane coatings because it will be very hard to recoat or refinish it again without sanding it wholly first.
Do not feel obliged to call the help of experts to make minor repairs on your flooring problems. There are those which are easy to deal with and you can try to solve it on your own. This can save you from a lot of hassle and money which can be used for bigger problems in the long run.
Hardwood floor moncler christophe repair takes a lot of time and patience. With appropriate techniques, tools and products, fixing of the floor will be as easy as 1-2-3.
Lee Dobbins writes for www.refinishing-hardwood-floors.com where you can learn more about choosing, maintaining and refinishing hardwood floors.